TDEMI 40G
- - Measuring from 10 Hz to 40 GHz
- - 162.5MHz Real-time BW up to 40GHz
- - 4000x faster than Receivers
The TDEMI 40G Measurement System covers the frequency range from 10 Hz to 40 GHz and suits EMC testing according to CISPR, MIL and DO standards. A fully gapless real-time analysis bandwidth of 162.5 MHz in the range of 10 Hz to 40 GHz makes it unique on the market. Completely new possibilties in EMC analysis and debugging are provided to the user coming along with a even further reduced measurement uncertainty.
TDEMI 26G
- - Measuring from 10 Hz to 26.5 GHz
- - 4000x faster than Receivers
- - CISPR, MIL and DO testing
The TDEMI 26G Measurement System covers the frequency range from 10 Hz to 26.5 GHz. Applicable for EMC testing according to CISPR, MIL and DO standards. Powered by its leading-edge signal processing unit measuring is performed 4000x faster than by heterodyne based instruments whereas a much higher frequency resolution is achieved and the measurement uncertainty is reduced.
TDEMI 18G
- - Emission Measurements up to 18 GHz
- - Up to 4000x faster than Receivers
- - Remote Control via TCP/IP
The TDEMI 18G Measurement System covers the frequency range from 9 kHz to 18 GHz. Applicable for EMC testing of electronics and IT equipment according to EN and FCC Regulations. By the standard configuration inherent real-time spectrogram mode the changing emissions of the DUT can be observed live, which makes the instrument the ideal choice for online EMC debugging.
TDEMI 6G
- - Emission Measurements up to 6 GHz
- - Remote Control via TCP/IP
- - Up to 4000x faster than Receivers
The TDEMI 6G Measurement System covers the frequency range from 9 kHz to 6 GHz. Thus, applicable also for EMC testing of consumer electronics and IT equipment now. By the standard configuration inherent real-time spectrogram mode the instrument is the ideal choice for online EMC debugging.
TDEMI 3G
- - Up to 4000x faster than Receivers
- - Emission Measurements up to 3 GHz
- - Low Noise Floor
Enhanced frequency range up to 3 GHz brings this instrument into the automotive EMC test market. A significant lower noise floor above 1 GHz than state of the art instruments is provided by the TDEMI 3G. Real-time spectrogram mode and high resolution measurements up to 3 GHz helpfull tools during the product developement process.
TDEMI 1G
- - Emission Measurements up to 1 GHz
- - Remote Control via TCP/IP
- - Up to 4000x faster than Receivers
The TDEMI 1G was the first TDEMI family member, enabling the user to significantly accelerate EMC testing. Up to 4000x times faster than conventional EMI receivers by its ultra high-speed ADC unit and real-time digital signal processing. The TDEMI can be applied for conducted, disturbance power and radiated emission measurements.
TDEMI 30M
- - Up to 4000x faster than Receivers
- - Conducted Emission Measurements
- - Automated Report Generation
Covering the frequency range from 9 kHz to 30 MHz, the TDEMI 30M is used for conducted emission measurements. The instrument provides an extremly high dynamic range due to autoranging, preselection and high resolution ADCs. The multiresolution ADC system already provides a spurious free dynamic range of about 90 dB (without preselection).
-
TDEMI 40G
- Measuring from 10 Hz to 40 GHz
- 162.5MHz Real-t. BW up to 40GHz
- 4000x faster than Receivers
-
TDEMI 26G
- Measuring from 10 Hz to 26.5 GHz
- 4000x faster than Receivers
- CISPR, MIL and DO testing
-
TDEMI 18G
- EMI Measurements up to 18 GHz
- Up to 4000x faster than Receivers
- Remote Control via TCP/IP
-
TDEMI 6G
- EMI Measurements up to 6 GHz
- Remote Control via TCP/IP
- Up to 4000x faster than Receivers
-
TDEMI 3G
- Up to 4000x faster than Receivers
- EMI Measurements up to 3 GHz
- Low Noise Floor
-
TDEMI 1G
- EMI Measurements up to 1 GHz
- Remote Control via TCP/IP
- Up to 4000x faster than Receivers
-
TDEMI 30M
- Up to 4000x faster than Receivers
- Conducted EMI Measurements
- Automated Report Generation
Upcoming
- EMV 2012 Düsseldorf
- 07 - 09/02/2012, Exhibition & Conference, Düsseldorf (GER)
- 2012 Asia-Pacific Symposium on EMC
- 21 - 24/05/2012, Symposium & Exhibition on EMC, Singapore
- 2012 IEEE EMC Society International Symposium on EMC
- 06 - 10/08/2012, Symposium & Exhibition, Pittsburgh, PA (US)
News
- 24/11/2011
- GAUSS INSTRUMENTS@EMV Düsseldorf 2012, Germany. Visit us from 7th - 9th of Feb. 2012 at booth CCD1-322 and check out our latest developements boosting your EMC measurements and tests.
- 17/08/2011
- GAUSS INSTRUMENTS@the IEEE EMC Symposium 2011. Technical Session with special focus on time-domain measurements techniques (WED-PM-1, Room 101A) - with four contributions of GAUSS INSTRUMENTS.